Product Categories

 

 

 

ELECTROPERM MAGNETIC CHUCK



ELECTRO-PEMACHINERM MAGNETIC CHUCKS FOR HEAVY DUTY MILLING

"KUMAUN" introduces Electro-perm Magnetic Chucks for heavy duty milling machine. These chucks ensure high magnetic and mechanical performance. This chuck is "COLD" device, as no internal wear or deformation resulting from moving internal parts.
Electro-perm Magnetic Chucks do not consume electrical power except for the very short period of activation or deactivation of the working surface. Once fixed to the machine table EPM chucks are as stable as machine.
EPM chucks are economical for operation and maintenance. Magnetic clamping system is most powerful. Chucks are switched ON & OFF by simple electrical pulse. A variable output from 20% to 100 % is controlled from push button unit.
In operating condition no power supply is necessary for holding work pieces. So no risk when power fails.
The de-magnetization cycle of chuck eliminates possible residual magnetism in work piece, therefore easy release for high alloy steel parts.
EPM chuck is designed for heavy-duty operation such as milling cut of 3 to 6 mm depth at recommended speed &             feed.

SPECIFICATIONS:

CAT No.                                               SIZE IN MM
                                                            L W        H
EPMC - 2412                                           600 x 300 x 90
EPMC - 3012                                           750 x 300 x 90
EPMC - 4012                                         1000 x 300 x 90
EPMC - 6012                                         1500 x 300 x 90
EPMC - 2416                                           600 x 400 x 90
EPMC - 3016                                           750 x 400 x 90
EPMC - 4016                                         1000 x 400 x 90
EPMC - 6016                                         1500 x 400 x 90
Accessories: Capacitor Discharge Type Control Power Unit.

Special sizes are available on request.

 
ELECTRO-PERM MAGNETIC CHUCK


ELECTRO-PERM MAGNETIC CHUCKS FOR GRINDING MACHINE


Electro-perm magnetic chuck offers minimum mechanical deformation with solid one piece housing. This chuck is a COLD device.

These chucks do not consume electrical power only when activation and deactivation of magnets power is required. This results in very less consumption of electricity as compared to conventional electrical chucks.

EPM chucks are economical for operation and maintenance and also most powerful chucks. These chucks are switched ON and OFF with simple electrical pulse. A variable output from 20% to 100% is controlled from one push button switch.
EPM chucks are entirely independent of external power supply during the holding of work pieces. So no risk when power fails.
  
The demagnetization cycle of EPM chucks reduces possible residual magnetism in the work piece.
SPECIFICATIONS:
Cat No.                         Sizes mm.                             Pole Gap mm
                                       L          W        H
SH - EPM - 1460             350 X 150 X 70                                 4 + 1
SH - EPM - 1860            450 X 150 X 70                                 4 + 1
SH - EPM - 2080             500 X 200 X 70                                 4 + 1
SH - EPM - 2480             600 X 200 X 70                                 4 + 1
SH - EPM - 2410             600 X 250 X 70                                 4 + 1                 
SH - EPM - 2412             600 X 300 X 70                                 4 + 1
SH - EPM - 3010             750 X 250 X 70                                 4 + 1
SH - EPM - 3012             750 X 300 X 70                                 4 + 1
SH - EPM - 3610             900 X 250 X 70                                 4 + 1
SH - EPM - 3612             900 X 300 X 70                                 4 + 1
SH - EPM - 4010           1000 X 250 X 70                                 4 + 1
SH - EPM - 4012           1000 X 300 X 70                                 4 + 1
SH - EPM - 6010           1500 X 250 X 70                                 4 + 1
SH - EPM - 6012           1500 X 300 X 70                                 4 + 1
SH - EPM - 6016           1500 X 400 X 70                                 4 + 1               
SPECIAL SIZES ARE AVAIBLE ON REQUEST

CAPACITOR DISCHARGE TYPE CONTROL POWER UNIT

Copyright ©2014 Shreepad Industries